Форум » Хочу заказать » Vintage Single Cut Model » Ответить
Vintage Single Cut Model
Мастер: This is a build that has the features and characteristics of the late 50s master single cut guitars. The dimensions, weight, carving, wood and hardware have been painstakingly detailed as to make a very enjoyable instrument. Here are the build components: Honduran mahogany body Honduran mahogany neck Eastern US hard maple flamed top (rift sawn with flecking) Reclaimed Brazilian rosewood fingerboard (100 years old) Royalite binding Holly veneer headstock with tapering and 17 dergree angle 6x6 Nylon nut Jescar fretwire - Jumbo Tyson Tone D. Allman wind PAF pickups with aged nickel covers Cellulos nitrate trapeziod neck inlay M-69 pickup rings ABR1 bridge and stop tail piece 12 degree radius neck Original C profile with slimmer characteristics CTS 500k potentiometers Switchcraft toggle and jack Original 1959 Sprauge Bumblebee capacitors Period correct toggle poker chip and pick guard Hot hide glue on the neck joint Aniline dyes in the correct sequence Light nitrocellulose lacquer finish The guitar can be left on the sunlight and will continue to fade the coloring naturally. The weight will be between 8 and 9.5 pounds. The mahogany has the correct saw pattern and is matched between the neck and the body. The body binding will not completely overlay the maple top at the cutaway. The tenon joint will have a slightly "mismatched" joint cut at the top.
Ответов - 8
Мастер:
realexxx: Вторая снизу, Всевидящее Око Саурона
Мастер:
Мастер:
Мастер:
Мастер:
Мастер:
Мастер:
полная версия страницы